AIS

PermaMark Selection Information

Selecting a Transfer Pad

In choosing the proper transfer pad, the following information is needed:

1. Size limitations imposed by printing machine. (Height, Width, Depth).
2. Size of artwork.
3. Description of part to be printed.

If further assistance is needed, contact your PermaMark Sales Representative at (814) 838-2270.

Pad Identification Number:

13U
Base Type
- 159
Pad Number
- 1
Tap / Thickness
- 3
Hardness

Base Type
13T - Wood Base
13U - Aluminum Base

Pad Number
Click on each type of pad to see the selection

Round

Half Moon

Roof Top

Custom

Round Pad Half Moon Pad Roof Top Pad Custom Pad

Tap / Base Thickness

Wood Bases   
1 - 1/8" Hole Thru, 1/2 in. Base
2 - 1/4 -20 T-Nut, 1/2 in. Base
3 - 3/8 -16 T-Nut, 1/2 in. Base
Aluminum Bases
1 - 10-32 Tap, 1/4 in. Base
2 - 3/8 -16 Tap, 1/4 in. Base
3 - 3/8-16 Tap, 1/2 in. Base
* Note: Base availability may be limited depending on pad size. Custom base requirements are available upon request.

Hardness (Shore 00)

1 - Extra Soft 22-27 Durometer
2 - Soft 30-35 Durometer
3 - Medium 40-45 Durometer
4 - Hard 50-55 Durometer
5 - Extra Hard 60-65 Durometer


4238 W. 12th Street
Erie, PA 16505

Phone: (814) 838-2270
Fax: (814) 833-5661